Single Phase Transformer module gives an exposure to conduct various experiments by different measuring devices and electrical load. Experiments that can be conducted over this module are Polarity, Transformation Ratio, Open Circuit Test, Short Circuit Test, Load Test, Iron Loss, Copper Loss, calculation of Efficiency and voltage regulation, etc.

• Transformer winding consist of copper for long term service
• Front board consists of MS Material with power coating to avoid any rust.
• Provided with suitable fuses for protection.
• Specially designed BS10 Terminals and patch cords for electrical safety
• Earthing screw provided at the back side For protection.

• Single Phase Transformer
• Power Rating                                                              : 1kV to 3Kv (customization in voltage rating is acceptable)
• Primary Winding                                                             : 0 – 125V ± 10%, 0 – 125V ± 10%, 50Hz
• Secondary Winding                                                       : 0 – 125V ± 10%, 0 – 125V ± 10%, 50Hz
• Configuration                                                            : Step-Up, Step-Down and Isolation Type
• Winding                                                                             : Copper
• Type                                                                                    : E-I Core
• Efficiency                                                                   :  Above 85% (considering experimental losses)
• Enclosure                                                                   : MS with powder coating/ epoxy paint
• Terminal brought out                                             : Yes, through BS10 Safety Terminals
• Protection                                                                :  Fuses and Earthing Nut
• Indicator                                                                   :  Mains Indicator